Extreme Networks Extreme Wireless Site Preparation And Installation Manual page 30

5 If mounting hole can be slid over pipe, install V-bolt (item 11) into the pole side bracket (one hole in
flange) and loosely secure the washers and nuts (items 1, 6, 7). Otherwise, locate bracket assembly
on pipe, and feed the V-bolt through and secure with washers and nut.
Figure 12: Install V-bolt
6 Attach mount assembly to the antenna using the 1/4-20 hardware in the hardware kit (Items 12, 13,
14). Mount can go on in either direction.
Figure 13: Attach Assembly
ExtremeWireless™ External Antenna with Wave 2
Antenna Installation
30