Continue Key; Abort Key; Exit Menu Key; Service Menu - HP 54501A Operation Reference

continue Key

abort Key

exit menu Key

service ·menu

clicker Key

all
When of the setup requirements have been satisfied, press the
continue key and the actual calibration pr
This is the only active front panel key during the cali b ration process.
you press this key the calibration process
previous calibration factors intact.
This key returns you to the Utility menu.
The service menu is used primarily for software settings and hardware
adjustments. These are to be used by qualified service personnel.
One cali b ration needed for the software calibration of the HP
is in the service menu. You must set the default cah bration before
continuing with the selfca! menu. To set the default
nm
I f you the def a u lt calibration, you must continue with the
self calibration. This process returns all calibration factors to
def ault.
•
Press the service menu key and enter the menu.
•
Press the ca! select key until 3 is displayed in the window and default
ca! is highlighted.
•
start tal
Press and
HP 5450lA
See the Service Manual.
The clicker key allows you to
turned on, an audible click is heard each time a key is pressed. The
selections are either on or off.
ocess
will
Note
when the instructions are displayed.
continue
turn on
the function. When the clicker is
will
begin.
terminate with the
5450lA
ca!;
Utility Menu
If
1 2-1 1