HP 54501A Operation Reference page 116

Define Measure Menu
1 1-6
Measurement delay, not to be confused with timebase delay (see Chapter
4, is useful when measuring source-to-source delays or
'Timebase Menu')
measuring time separation on the same source or a different source. The
front panel delay measurement
100),
1
count (from
to
is used as a reference point.
mid)
•
When setting edge count fields, it is handy to press the f me key.
the course mode the
11, 21, ... 100).
In the f m e mode the increment/decrement sequence
in l's.
When you select the delay measurement from the front panel you must
then select the sources (c#, f#, m#) and the source number.
+ width allows you to choose only the point on the waveform transition
(upper, lower, mid) io measure when making the positive width of a
displayed waveform.
- width allows you to choose only the point on the waveform transition
(upper, lower, mid) to measure when making the negative width;6f a
displayed waveform.
can
be redefined by edge slope, edge
and what part of the transition edge (upper, lower,
HP 5450lA
increments/decrements by tens
In
(1,
is