Vmarker 2 - HP 54501A Operation Reference

t.V markers
off
:Dl
1
2

Vmarker 2

Vmarker 1
V
Delta t/Delta Menu
8-2
selection key toggles the markers on and off. With the t. V function
This
turned on the next two fields are activated allowing you to control the two
markers individually.
t.
When the V markers are turned on,
appears in the factors display arca. Thc dclta
following:
If delta V
negative, Vmarker 1 is located at a more positive voltage level
is
than Vmarker 2.
a
selection key is
This
you to select the desired channe�
for measurement. By pressing the selection key again, the highlighted
field moves to the numeric display to select the voltage level. TYPically,
you will place Vmarker 2 at the desired level on the waveform displa y and
read the leve� both in the highlighted field, and in the factors ar ea of the
waveform display.
the voltage marker with shorter dashes.
Vmarker 2
is
Vmarker 1 operation is identical to Vmarker 2, except it is represented b y
longer dashes.
V marker2, V markerl,
Vmarker 2 Vmarker
•
two function control field. Tbe
memory, or function
and de/ta
c as
c n trY is cal ula c d
t
V
1 = delta V
selection allows
first
to place Vmarker 2
V
the