Brother PDS-5000F User Manual page 59

®
Scan (Windows )
Edge Fill
Select White or Black and set a value (in Millimeters) to add a white or black edge around the border of your
scanned image.
Select the Edge Extend check box to add a white or black edge outside the border of your scanned image.
NOTE
• The maximum edge fill value equals half the length of the shorter side of a selected scan area.
For example, if you select Letter size, which is 8.5 × 11 in., the maximum value for the white edge or black
edge is 4.25 in. (or half of 8.5 in.). If you select an A4 size, which is 210 × 297 mm, the maximum value for
the white edge or black edge is 105 mm (half of 210 mm).
• If you set a value greater than the maximum allowed, the value automatically defaults to the maximum.
• To disable this feature, set the value to "0".
Original Edge Fill: 20 mm (Black) Edge Fill: 20 mm (Black)
Edge Extend: Selected
5
54