Copying A Setting Group; Selecting A Setting Group For Editing - ABB RED615 Operation Manual

Section 6
Operating procedures
6.4.5.2
6.4.5.3
74
A071152 V3 EN
Figure 54: Selecting active setting group
4. Commit the settings.
Remember to document the changes you make.

Copying a setting group

1.
Select Main menu/Copy setting group and press
2.
Select the source and the destination with
3.
Set the group numbers with
4.
Press to confirm or
If the destination group is the active one, these settings become valid.

Selecting a setting group for editing

1. Select Main Menu/Settings/Edit setting group.
2.
Select the setting group to be edited with
3.
Press to confirm the selection.
4. Edit the settings.
A070858 V3 EN
Figure 55: Selecting a setting group
and
and .
to cancel.
or
1MRS756499 A
.
.
.
RED615
Operation Manual