Clearing And Acknowledging - ABB RED615 Operation Manual

Section 4
Using HMI locally or via web interface
4.2.8
50
value is not stored in non-volatile memory and thus the reboot
restores the original value.
GUID-834A71AE-B6C1-4EAD-840F-929B3AF18A85 V3 EN
Figure 32: Committing changes
Committing values will take a few seconds.
If you only write values to the IED and then reboot, the old values
will resume in the IED as active values and the new values are lost.

Clearing and acknowledging

Reset, acknowledge or clear all messages and indications, including LEDs and latched
outputs as well as registers and recordings, in the Clear menu.
1. Click the Clear menu.
1MRS756499 A
RED615
Operation Manual