Group Policy Setting In Com600 - ABB COM600 series 5.0 Cyber Security Deployment Manualline

Substation management unit

Hide thumbs Also See for COM600 series 5.0:

Table of Contents

1MRS758267

COM600 series 5.0

Cyber Security Deployment Guideline

4. In the services listed, find Windows Update service and double click to open the

properties dialog.

5. In the properties window, set

Startup Type to be Automatic.

Click Start to start the service.

Then click OK to save and close the properties dialog.

Group policy setting in COM600

Windows installed in COM600 is by default set to receive updates directly from Microsoft

Update Server. Change this default setting to receive updates from the intermediary local

WSUS server. The setting is changed in Local Group Policy Editor.

If COM600 is setup to be part of a domain, then the changes

made to Local Group Policy will be overwritten by Domain

Group Policy. In this case, contact the Domain Administrator

to make the needed changes to Domain Group Policy object.

To connect COM600 to local WSUS server:

1. Open Control Panel.

2. Click Administrative Tools and select Local Security Policy.

3. Local Group Policy editor window opens.

4. Go to Local Computer Policy > Computer Configuration > Administrative

Templates > Windows Components > Windows Update. All settings related to

Windows Update are shown.

5. Double click Specify intranet Microsoft Update Service Location.

6. Click Enabled and type in the URL that includes IP Address of WSUS server:

Set the intranet update service for detecting updates to http://{IP Address or

hostname of WSUS Server}:8530

Set the intranet statistics server to http://{IP Address or hostname of WSUS

Server}:8530

7. Click OK.

Table of Contents