Table of Contents
Advertisement
20
MODALITÀ PARALLEL
Modo di connessione:
Impostare la modalità di funzionamento dell'am-
plificatore su 'Parallel' .
Con la predisposizione PARALLEL un solo segna-
le viene amplificato da entrambi i canali 1 e 2
dell'amplificatore. In altre parole, un segnale col-
legato all'ingresso del canale 1 viene inviato sia
all'uscita 1 che all'uscita 2.
NOTA - Carico minimo 2 Ohm!
SPEAKON OUT 1
CH1 OUTPUT:1+/1-
CH2 OUTPUT:2+/2-
BRG +/-=1+/2-
OFF
0
SPEAKON OUT 2
CH2 OUTPUT:1+/1-
MAINS AC 220V 50Hz 2300W
2+/2- NOT IN USE
CH1 OUTPUT:
SPEAKON 1+1-
BINDING POST
SPEAKON OUT 1
CH1 OUTPUT:1+/1-
CH2 OUTPUT:2+/2-
BRG +/-=1+/2-
SPEAKON OUT 2
CH2 OUTPUT:1+/1-
2+/2- NOT IN USE
CH2 OUTPUT:
SPEAKON 1+1-
BINDING POST
TDX3600/7000/9000
IT
SENSITIVITY
XLR
1=G
2=+
3= -
CH2 OUTPUT:
SPEAKON 2+2-
PARALLEL MODE
Connection of this Mode:
Set the amplifier operation mode to 'Parallel' po-
sition.
When in this setting, one signal is treated by both
channel 1 and 2 of the amplifier. In other words
a signal connected to input 1 is sent to both out-
put 1 and output 2.
NOTE - 2 Ohm minimum loading!
Serial No
DAD is trademark of
MUSIC & LIGHTS
musiclights.it
Manufactured in P.R.C.
LINK SIGNAL CH1
XLR
1=G
2=+
3= -
SIGNAL
LINK
POWER
INPUT SIGNAL CH1
EN
TDX3600/7000
SENSITIVITY
Fig.7
Advertisement
Table of Contents
