Step 3: Connecting Tv Set; Using Video In Jack (Cvbs); Using Component Video In Jack (Pr Pb Y) - Philips FWD796/21 User Manual

Step 3: Connecting TV set

IMPORTANT!
– You only need to make one video
connection from the following options,
according to the capabilities of your TV
system.
– S-Video or Component Video
connection provides higher picture
quality. These options must be available
on your TV set.
– Connect the system directly to the TV
set.

Using Video In jack (CVBS)

Use the composite video cable (yellow) to
connect the system's VIDEO jack to the video
input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the TV set.
To listen to TV channels through this system, use
the audio cables (white/red) to connect AUX
IN (L/R) jacks to the corresponding AUDIO
OUT jacks on the TV set.
8

Using component Video In jack (Pr Pb Y)

Use the component video cables (red/blue/
green) to connect the system's Pr Pb Y jacks to
the corresponding Component video input jacks
(or labeled as Pr/Cr Pb/Cb Y or YUV) on the TV
set.
To listen to TV channels through this system, use
the audio cables (white/red) to connect AUX
IN jacks to the corresponding AUDIO OUT
jacks on the TV set.
Connections
8
11