Establish Bluetooth Communication And Weigh - Ravas iForks User Manual

6.3

Establish Bluetooth communication and weigh!

1
Switch on the iForks:
press the blue button below both batterypacks.
3
NET
e1 e2
ID CODE PT
5 sec.
5
1000
System is ready to weigh.
e3 F1 F2
TOTAL PCS KG/LB
CLR
2
NET
e1 e2
ID CODE PT
Start up the indicator:
press the on/off key.
4
NET
e1 e2
ID CODE PT
Before each weighing: check the zero point!
Before each weighing it is necessary to check
whether the system is unloaded and free.
If the indicator does not determine the zero point
automatically, it must be done manually using the
>0< key.
6
NET
e1 e2
ID CODE PT
Before the next weighing,
check the zero point again.
USER MANUAL –
e3 F1 F2
TOTAL PCS KG/LB
CLR
e3 F1 F2
TOTAL PCS KG/LB
CLR
e3 F1 F2
TOTAL PCS KG/LB
CLR
iForks 16