Installing A Hard Drive Blank; Removing The Hard Drive From The Hard Drive Carrier - Dell PowerEdge C6400 Installation And Service Manual

Figure 21. Removing a hard drive blank
Next steps
Install a hard drive or a hard drive blank.
Related links

Installing a hard drive blank

Installing a hard drive blank
The procedure for installing 2.5 inch and 3.5 inch hard drive blanks is identical.
Prerequisites
Follow the safety guidelines listed in
CAUTION: Mixing hard drive blanks from previous generations of PowerEdge servers is not supported.
Steps
Insert the hard drive blank into the hard drive slot, and push until the release button clicks into place.
Figure 22. Installing a hard drive blank
Next steps
1 Follow the procedure listed in

Removing the hard drive from the hard drive carrier

Prerequisites
Follow the safety guidelines listed in
Safety instructions.
After working inside your system.
Safety instructions.
Dell PowerEdge C6400 Installation and Service Manual
Installing and removing enclosure components
41