Clearing The System - Digitrax Zephyr xtra Manual

26.0 Clearing the System

Some users prefer to "dispatch" or release all addresses active in their system
before shutting down. This can prevent unexpected results when you power up
the layout again.
To release/dispatch addresses (this is optional):
1. Press the
lOCO
2. Enter the loco address on the numeric keypad. The display will flash the
FUNCTION Indicator Dot and the loco address. Press the
again.
3. Set the Throttle Knob to
4. Press the
exit
5. Repeat for all locos/addresses used in your session.
To Shut Down the System:
1. Press the Power Key to turn track power off.
2. Unplug the PS314 from the wall.
©2012 Digitrax, Inc.
key.
.
StOp
key.
www.digitrax.com
key
lOCO
51