Introduction; Zephyr Xtra Components; Quick Start Guide; Unpacking Your Zephyr Xtra - Digitrax Zephyr xtra Manual

1.0 Introduction

Congratulations on your purchase of a Digitrax Zephyr Xtra Starter Set!
Your success with and enjoyment of our products are very important to us.
After all, this is a hobby and it is FUN!!! Refer to the Quick Start Guide that
came with your system or follow the steps in the sections below to get up and
running right away. Please read this manual to learn more. We have included
lots of hints and operating ideas based on our experience. The Zephyr Xtra is
designed for easy operation and expandability with Digitrax LocoNet. With
LocoNet, just plug in system components to build the layout control system
that you've always wanted! If you have questions not covered by this manual
please contact your dealer or Digitrax technical support.

1.1 Zephyr xtra Components

Your Zephyr Xtra Starter Set contains:
DCS51 All-in-one command station, throttle and booster to run your layout
PS314 Power supply to provide power to run your DCS51
LT1 Decoder and LocoNet Cable Tester
Quick Start Guide - To get you up and running
Zephyr Xtra Manual - System Reference Manual
Digitrax Decoder Manual - Reference for Digitrax Decoders

2.0 Quick Start Guide

2.1 unpacking your Zephyr xtra

Unpack your box and locate the DCS51 Command Station and the PS314
power supply.
DCS51
Command Station
©2012 Digitrax, Inc.
lt1 Decoder and loconet®
Cable tester
www.digitrax.com
power Cord
pS314
DC plug
4