Setting The Display Backlighting (Lcd); Switching The Unit Of Weight; (Unit) - Seca 727 Instruction Manual

Setting the display
backlighting (Lcd)
Switching the unit of
weight (Unit)
You can change the duration and brightness of the
display backlighting.
1. Select the "Lcd" item from the menu.
2. Confirm the selection.
3. Select a menu item
– dUr: duration
– bri: brightness
4. Confirm your selection.
The current setting is displayed.
5. Select the setting you require:
Function
Duration
Brightness
6. Confirm your selection.
You exit the menu automatically.
7. If you also wish to make settings for the second
function, repeat this process.
On non-calibrated scales, you can select the unit (Unit)
in which you want weight to be displayed.
CAUTION!
Patient hazard
In order to avoid misinterpretations, test results
for medical use must be displayed and used in
SI units only. Some devices offer the ability to
display test results in other units. This is only an
additional function.
– Use the results exclusively in SI units.
– The use of measurement results in non-SI
units is the sole responsibility of the user.
1. Select the item "Unit" from the menu.
2. Confirm your selection.
The current setting is displayed.
Select the unit in which you want weight to be
displayed:
– 9r: kilograms (kg)
– LbS: pounds (lbs)
English
Setting
• Short (approx. 15 sec.)
• Long (approx. 45 sec.)
• PErM (continuous)
• 50 %
• 100 %
• Off
Operation • 65