Seiko I Infotech IP-6600 Maintenance Manual page 50

SIIT CONFIDENTIAL
(4) Automatic cleaning (AUTO CLEANING)
Sets whether to perform automatic cleaning.
# AUTO CLEANING
> OFF
<Parameter (Choice input)> [Initial value: ON]
(5) Ink fill mode (INK CHARGE MODE)
Indicates whether ink filling is completed. The state can be changed.
# INK CHARGE MODE
> NOT YET
<Parameter (Choice entry)>
(6) Cleaning (CLEANING)
Cleans heads.
# CLEANING
> NORMAL
<Parameter (Choice entry)>
(7) Cap open (CAP OPEN)
Open the cap.
# CAP OPEN
>
<Parameter (Execution)>
3-24
The service cleaning uses while new six maintenance liquid cartridges (for six
colors) for one sequence. The head wash uses whole new six cleaning liquid
cartridges (for six colors) for one sequence. Also, exclusive dummy cartridges
are required for ink extracting during service guidance.
Opening or closing the rear cover or levers should be avoided while service
clean or head wash is in progress, or the operation may have to be restarted
from the beginning, resulting in the waste of maintenance or cleaning fluid. If
service clean or head wash is to be restarted, new maintenance or cleaning fluid
cartridges are required.
Both the service cleaning and the head wash take approximately one our. The
cartridge setting and removing guidance are displayed during service cleaning
and head washing. Follow the guidance.
Empty the waste ink bottle.
- OFF : Do not perform automatic cleaning.
- ON : Performs automatic cleaning.
- FINISHED : Ink filling is completed.
- NOT YET : Ink is not filled.
- NORMAL : Cleaning 1 (Ordinary cleaning)
- SLIGHT : Cleaning 2 (Slight cleaning)
- STRONG : Cleaning 3 (Powerful cleaning)
None
NOTE