Wiping Position Correction - Seiko I Infotech IP-6600 Maintenance Manual

8.7

Wiping Position Correction

The contact position of the blade (wiper rubber) relative to the head is corrected.
<Parameter>
(Correction procedure)
With the carriage at the wiping unit, enter a correction value from the operation panel
so that the wiping blade position is at the center of the surface of the head nozzles..
1.
Press the
2.
Press
3.
Press
±5 mm, 0.1
mm/step
+ : Move to the wiping unit side.
- : Move to the capping unit side.
,
keys, enter a password
(press
, ,
enter the maintenance mode.
key to select # WIPING POS.
menu.
key to select # WIPING POS.
menu.
Carriage
(-) Capping unit side
←
(+) Wiping unit side
→
, ,
keys) to
,
SIIT CONFIDENTIAL
Section 8 Adjustment
Blade (wiper rubber)
MEC. ADJ H. M NTE
▲
H. ADJ. RESET
ADJUST PATTERN
＃
TOP&BTM ADJ
＞
WIPING POS.
＃
+3.0mm
＞
▼
8-7