Models With Smart Entry System; Engine Start/Stop Button - Honda Fit 2018 Owner's Manual

Models with smart entry system

ENGINE START/STOP Button

■
Changing the Power Mode
Continuously Variable Transmission
VEHICLE OFF (LOCK)
The button is off. The steering
wheel is locked.
all electrical components is
turned off.
ACCESSORY
The button blinks (in red).
Operate the audio system and
other accessories in this position.
ON
The button is blinks (in red). All
electrical components can be
used.
Without depressing
the brake pedal
Press the button without transmission in
Put the transmission into
Press the button.
U.S. models
*1 : Except U.S. models with continuously variable transmission
uuOperating the Switches Around the Steering WheeluENGINE START/STOP Button
Manual Transmission
*1 The power to
Without depressing
the clutch pedal
P (
, then press the button.
P (
The transmission in .
P (
1ENGINE START/STOP Button
ENGINE START/STOP Button Operating Range
You can start the engine when the smart entry
remote is inside the vehicle.
The engine may also run if the smart entry remote is
close to the door or window, even if it is outside the
vehicle.
ON mode:
The button is on (in red), if the engine is running.
If the battery of the keyless remote is getting low, the
engine may not start when you push the ENGINE
START/STOP button. If the engine does not start,
refer to the following link.
2 If the Smart Entry Remote Battery is Weak
P. 553
.
Continued
Operating Range
155