Control Panel; Safety Functions; Bread Baking Machine Program Phases; Insert The Baking Tin - Fakir PANE DELUXE User Manual

GB

CONTROL PANEL

Repeat function
If there is a brief power cut of cup to approximately seven minutes the programme
position is stored and the machine can continue from this position when power is
restored. This is possible only if the program was stopped before the kneading phase
was reached.Otherwise you will have to start from the beginning.

Safety functions

If the temperature of the appliance is stil too high for a new program after using the
appliance previously, E 01 will appear on the display when pressing start again and an
acoustic signal is given. If this is the case, press the START/STOP key until the E 01
messagee is deleted and the basic setting appears on the display. Remove the
container and wait until the appliance has cooled.
The BAKING program can be started immediately even when the appliance is stil hot.

BREAD BAKING MACHINE PROGRAM PHASES

1. Insert the baking tin

Place the non-stick coated baking tin exactly in the middle of the base inside the baking
space. When the baking tin is pressed lightly in the centre the fixing device locks into
place. To remove the baking tin pull w,th medium force on its carrying handle.
CAUTION!
The handle is hot after baking. Please use an oven
cloth or similar item.

2. Put the ingredients

The ingredients must be put into the baking tin, the order specified in the relevant
recipe.

3. Select program

Select the desired program with the SELECT‹ON key. Choose the level corresponding
to the selected program. Then select the desired degree of browning. Use the TIME
key to set the time when the program is to be started. Press the START/STOP key.
PANE DELUXE
30