Preparation For Installation - Samsung ACN016NDEHA Installation Manual

Our units should be installed in compliance with the spaces shown in the installation manual, to ensure accessibility from both
Power supply line, fuse or circuit breaker
with current local safety standards.
to ensure the operation of any other domestic appliance connected to the same electric lines.
included in the manual.
to the installation of air conditioners.
Make sure that you earth the cables.
Install the circuit breaker.
Make sure that the condensed water dripping from the drain hose runs out properly and safely.
Install the power cable and communication cable of the indoor and outdoor unit at least 1m away from the electric appliance.
Install the indoor unit away from lighting apparatus using the ballast.
Do not install the air conditioner in following places.
leak. The capacity of the heat exchanger may reduce or the air conditioner may be out of order.
The copper pipe or connection pipe may corrode and refrigerant may leak.
normally due to control system.

Preparation for installation

General
Do NOT install the air conditioner in a location where it will come into contact with the following elements :
Combustible gases
Saline air
Machine oil
Sulphide gas
Avoid installing the air conditioner :
In areas where it is exposed to direct sunlight. Close to heat sources.
In areas where curtains and furniture could affect the supply and discharge of air.
during the use of the air conditioner.
3