Table of Contents
Advertisement
Preparation for outdoor unit installation
The air conditioner uses R-410A refrigerant.
Outdoor unit dimension
A Type
AC030MXSCCC / AC036MXSCCC
Moving the Outdoor Unit by Wire Rope
Fasten the outdoor unit by two wire ropes (26.3 ft or longer) as shown in the
figure. To prevent from damage or scratches, insert a piece of cloth between
the outdoor unit and rope, then move the unit.
❋ The appearance of the unit may be different from the picture depending
on the model.
When moving an outdoor unit by hand
Moving the outdoor unit by lifting up and carrying due to the short travel distance.
- Two people should carry the outdoor unit.
- Be careful not to damage the heat exchanger of the rear side of the outdoor unit during transportation.
- Be careful not to get hurt by the sharp surface of the heat exchanger.
24.4
37.0
(Unit : inch)
Wire rope
Plate protection
cloth
5
Advertisement
Table of Contents
