Channel Plan; Audio Frequency 1 And 2; Aux. Supply; Relay 1 And Relay 2 - RF Central RFX-RMR Operator's Manual

the analog demodulator.
9.7.3

Channel Plan

The menu used is the same as the digital menu as mentioned in clause 9.5.3

9.7.4 Audio frequency 1 and 2

Each of the analog audio sub carrier frequencies can be adjusted from their factory settings
(4.83/5.8MHz) by +/- 200 kHz
The ▲▼ buttons are used to select the sub carrier to be adjusted. The Enter button then allows the
▲▼ to edit the required frequency; the A and B buttons are for cursor left/right. The Enter button then
stores the value and returns to the Main menu.
9.7.5

Aux. supply

The menu used is the same as the digital menu as mentioned in clause 9.5.8

9.7.6 Relay 1 and Relay 2

The menu used is the same as the digital menu as mentioned in clause 9.5.9
9.7.7

LCD Timeout

The menu used is the same as the digital menu as mentioned in clause 9.5.10

9.7.8 Prog Channels

The menu used is the same as the digital menu as mentioned in clause 9.5.12
.
RFX-RMR Issue 1.0
41
page 31 of