Front Panel Controls - RF Central RFX-RMR Operator's Manual

The front panel of an RFX-RMR comprises two 2-way switches (On/Off and Analog/Digital), a 10-way
rotary switch (BAS channel number), six push button switches (used to navigate the various RFX-
RMR menus) and an LCD display.
Also fitted are three LEDs – 'DC' (Green), 'Status' (bi-color green/red), and 'Local' (bi-color green and
amber)
On/Off Switch
Digital/Analog switch
can also be controlled via the push buttons and RFX-RMR menus.
Channel
channel 10. Please note that the BAS channels can be switched between the 'current' plan and the
'new' plan via the push buttons and RFX-RMR menus. The exact frequency selected by either method
is shown on the top menu page on the LCD display.
'DC' LED
Receiver. This LED will be lit irrespective of whether the unit is switched 'on' or 'off'.
Status LED
flashing green light indicates that the RFX-RMR is functioning correctly but that no valid RF signal is
present at the input to the receiver. A stable red light indicates that the unit has an alarm condition.
Local LED
being accepted from the front panel rocker switches or from the push button menu. Green light =
rocker switch operation, amber light = push button menu operation.
Full details of the push button menu structure can be found in section 8.
RFX-RMR

5 FRONT PANEL CONTROLS

Front panel view of the RFX-RMR
Down for Off, up for On
Down = Analog transmission, Up = Digital transmission. This function
Rotary, 0-10. 1= BAS channel 1, 2 = BAS channel 2, etc to 0 = BAS
Lit green whenever a correct DC voltage is presented to the RFX-RMR
Stable Green indicates that the RFX-RMR is functioning correctly. A
Indicates whether the 'channel' and 'analog/digital' switching controls are
Issue 1.0
41
page 12 of