Rear Panel Connections; Rf I/P; Digital Receive Section - Video Output (Bnc Connectors); Analog Receive Section - Video Output (Bnc Connector) - RF Central RFX-RMR Operator's Manual

6.1

RF I/P

Connector Type:
6.2

Digital Receive Section - Video output (BNC connectors)

Connectors for SDI/ASI digital (2), these connectors may be independently configured from the
keypad to output either ASI or SDI.
Composite analog (2) or component analog (Y/C) video, selected via front panel keypad.
75Ω BNC connectors (female)
6.3 Analog Receive Section – Video output (BNC connector)
Connector for composite video output, 75Ω BNC connector (female)
6.4

Digital Receive Section Analog - Audio outputs (XLR connectors)

The four channels of analog audio are connected via four 3pin XLR male connectors. The connectors
are designated Ch1, Ch2, Ch3, and Ch4. These outputs can be independently selected for adjustable
gain, via the front panel keypad
The two channels of AES EBU stereo digital audio are connected via two-3pin XLR male
RFX-RMR

6 REAR PANEL CONNECTIONS

Rear Panel view of RFX-RMR showing all connections
50Ω 'N' type (female)
Pin
1
2
3
Analog Ground
Ch1/ A / Left +
Ch1/ A / Left -
Issue 1.0
41
page 13 of