Remove screw 2 for bracket
of end muffler from passenger
footrest.
Pull off end muffler toward rear
and lay on a soft surface.
Shift into first gear.
Remove bolts 3 of rear wheel,
holding wheel as you do so.
Lower rear wheel to the ground
and roll out toward rear.
Installing rear wheel
Malfunctions may occur
during control interventions
by ABS and ASC if a wheel other
than the standard wheel is in-
stalled.
Please see the information on
the effect of wheel sizes on the
chassis control systems ABS
and ASC at the beginning of this
chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Place rear wheel on rear wheel
support.
Install screws 3 with specified
torque.
8
115
z