BMW R 1200 RT Rider's Manual page 124

8
122
Remove bulb sockets 2 for
turn indicators or bulb sock-
ets 3 for tail light and brake
light bulbs from lamp housing
z
by turning counterclockwise.
Press bulb 4 into socket and
turn counterclockwise to re-
move.
Replace defective bulb.
Do not touch the glass of
new bulbs with your fin-
gers. For installation, use a clean,
dry cloth. Dirt deposits, in par-
ticular oil and grease, interfere
with heat radiation from the bulb.
Overheating and therefore short
service life of the bulbs are the
consequence.
Bulb for taillight/brake
light
P21W / 12 V / 21 W
Bulbs for flashing turn
indicators, rear
PY21W / 12 V / 21 W
Press bulb 4 into fitting and
install turning clockwise.
Mount removed bulb socket
in lamp housing and lock by
turning clockwise.