NOMA 052-8398-2 Owner's Manual page 8

6
Toll Free 1-866-827-4985 model no. 052-8398-2
6. Loosen two canopy screws part way, and then push the canopy upwards by inserting canopy
screw heads into key hole slots, rotate the canopy till it is locked in place, and finally tighten canopy
screws (Fig. 6).
Attach the canopy cover to canopy and rotate it
clockwise until tight.
7. Assemble blade arm to blade with blade screws (Fig. 7).
8. If there are plastic tabs shaped like bottle caps, remove and
discard them. These are stabilizers that protect the motor
during shipping.
A slot in the switch housing mounting plate allows you to
tighten the blade assembly to the motor (Fig. 8).
Using motor screws provided, line up the blade arm
with the holes in the motor housing and tighten the
screws securely.
Canopy
Blade
Canopy Cover
Fig. 6
Blade Arm
Blade Screw
Fig. 7
Switch
Housing
Fig. 8