GB
Settings
User menu
Select
P
A
Confirm.
OK
Browse the menu options.
Confirm.
OK
Menu
Operation
options
Time (01)
For weekly program. Time and date
dst (02)
For weekly program. Daylight saving/
summer time and winter time
Frt (03)
For weekly program. No fan (fan off) in
reduced mode.
In t (04)
Read internal temperature.
For weekly program. The control learns
ItcS (05)
when it needs to start to achieve a cer-
tain desired temperature at a specific
time in the environment it is used.
rF (06)
For PF Smart App. Pairing the RF module
with the control.
oPn (07)
Open window mode to save energy. If
the temperature drops more than 3 °C
in one minute, the control enters frost
protection mode for 15 minutes (see
Temperature Modes). Unless the tem-
perature drops further, after 15 minutes,
the control returns to previous settings.
clr (08)
Factory Reset. Clear all settings.
uEe (09)
Read version number.
26
PFS
Power failure
Note! A power loss longer than 12 hours may
require an adjustment of time and date.
The week program is affected if the clock is
not correctly set.
Default
settings
Must be
set if the
weekly
program
is to be
used
on (on)
off (OFF)
-
on (on)
-
on (on)
-
-
Description
Set the following:
•
hour (24 h)
•
minute
•
weekday: mon=1, sun=7
•
day/month
•
year
Increase/decrease with +/-.
Confirm every step with OK.
Switch between on (on) and off
(OFF) with +/-.
Confirm with OK.
Switch between off (OFF) and
on (on) with +/-.
Confirm the selected with OK.
Press OK to return to the menu..
Switch between on (on) and off
(OFF) with +/-.
Confirm the selected with OK.
See separate manual for PF
Smart App.
Switch between on (on) and off
(OFF) with +/-.
Confirm the selected with OK.
Switch between no (no) and yes
(YES) with +/-.
To factory reset, choose yes
by retain OK about 4 seconds
(countdown).
Press OK to return to the menu.