Frico PFSE4 Original Instructions Manual page 13

Fan modes
The fan speed can be set to suit the needs,
modes Auto, Off, Low or High.
User menu
Select
P
A
Confirm.
OK
Set the desired fan mode.
A
Auto
Low
Confirm.
OK
Temperature modes
It is possible to choose between three modes -
Comfort mode, reduced mode (night mode) or
Frost protection. Values set for mode Comfort
and Reduced is also used in the weekly
program, when it is active.
User menu
Select mode in the user menu:
Comfort
Reduced
Frost protection
Confirm.
OK
Set the desired room temperature.
Confirm.
OK
OFF
Off
High
PFS
Fan mode Function
Auto The fan runs at low speed except:
•
•
Off The fan is off.
When Off is selected, the fan first
runs during a cooling period for
the right temperature to be achie-
ved before it turns off.
The internal sensor controls,
which may cause power reduc-
tion, to prevent excessive internal
temperature.
Low Low speed
The internal sensor controls,
which may cause power reduc-
tion, to prevent excessive internal
temperature.
High High speed
Default settings
Temperature
mode
Comfort
Reduced
Frost protection
See section Fan modes to set the desired
fan mode. For temperature mode Frost
protection, the fan mode is locked to High (for
maximum heat distribution).
when the room temperature
is more than 2 °C below the
set point, then the fan speed
increases to high speed for a
shorter heating time.
if it is too hot in the the unit
Setpoint Fan mode
21 °C
18 °C
10 °C High (locked)
GB
23