Important Information Before Commissioning; Remote Control - Kathrein CAP 620 Original Operating Manual

13

Important information before commissioning

Warning
In the following operating instructions we assume that the receiver and the turntable have
been properly installed and connected, as described in the installation and operating
manuals If you have not yet done so, read the safety instructions at the beginning of the
receiver operating manual and follow them when handling the receiver and the turntable!
Important
Risk of damage to property
● Before setting up your satellite system, make sure that the location allows a free view
to the satellite positions to the south and is not shadowed by trees or other obstruc-
tions This will save you time and effort
● So as to avoid overheating the turntable motors, do not operate the motors continu-
ously for longer than 20 minutes None of the search procedures initiated by the
CAP 620 will require as much as 20 minutes of operation Only repeated unsuc-
cessful search procedures or manual overrides by the user can cause this limit to be
exceeded.
● As soon as the ignition signal is no longer present at the turntable, if the receiver is
switched on the turntable will be supplied with a +12 V power supply and may auto-
matically move to the last known satellite position Therefore switch your receiver on
only if you wish to watch TV

Remote control

All settings on the receiver are made using the remote control!
46 of 64