Cap Menu (Polar Antenna Settings); Calling Up The Cap Menu 52; Move Cap To Park Position 52; Reset Turn Table Antenna 52 - Kathrein CAP 620 Original Operating Manual

15

CAP menu (polar antenna settings)

15�1 Calling up the CAP menu

Press (green button) One of the following displays appears:
You can make further CAP settings from the main menu under "Settings", "Antenna & satellites", "Tuner
configuration", "Tuner 1" (CAP), "CAP settings".
15�2 Move CAP to park position

Press the (green) button, select with the
The CAP menu disappears and the turntable moves to the park position
After that the menu item "Move CAP to park position" is renamed "Move to the last satellite"
15�3 Reset turn table antenna
Note
Before exchanging any component of the system (e.g. the receiver) the polar antenna should be moved
to the park position by means of the "Reset turn table antenna" command "Reset" deletes all previously
saved satellite positions However, the satellite data in the receiver is retained

Press the (green) button, select with the
The following on-screen display appears:

button to confirm, or the
Press the
52 of 64

buttons "Move CAP to park position" and press

buttons "Reset turn table antenna" and press

button to cancel


