General Specifications - Fenix PTD55 SERIES Operation Manual

3 - GENERAL SPECIFICATIONS

3.1 - PRINTING SPECIFICATIONS
Printing method
Dot density
Printing direction
Printing width
Printing width available
Printing speed
Paper feed speed
(1) 'dpi': dots per inch.
(2) Printing speed could vary depending on the print head temperature as well as the command processing and
the data transmission speed. Low transmission speed could cause intermittent printing. It is recommended to
transmit data to the printer as quickly as possible.
3.2 - CHARACTER SPECIFICATIONS
Character per line (default)
Character spacing (default)
Character structure
Character size (mm)
Number of characters
Line spacing (default)
Characters can be scaled up to 64 times bigger than their normal size.
(1)
3.3 - PAPER SPECIFICATIONS
Paper type
Paper specifications
Paper loading
Width
NOTES:
→ Print quality varies depending on paper types.
→ Use the specified thermal paper, or proper print quality may not be obtained, the life of the
print head and autocutter unit may be shortened, or printer troubles may be caused.
Thermal line printing
203 x 203 dpi
Unidirectional with friction feed
M-T522II 60mm (448 dots)
54 mm (432 dots)
High speed mode: up to 250mm/s
250mm/s (continuous paper feed)
1 inch = 25.4mm; 203 dpi = 8 dots per mm
Font A: 24
0.5 mm (4 dots)
Font A: 12 x 24 dots (1.5 x 3 mm). (default)
Font B: 8 x 16 dots (1 x 2 mm).
Standard
(1)
Double-width
Double-height
Double width/height:
Alphanumeric characters:
Extended Graphics:
1,875mm (15 dots)
Thermal
T2CH826
T28I381
T21I06S (all from Ifb Ticket Systems)
T28H960
T29J10S
Automatic.
54mm
PTD55 SERIES OPERATION MANUAL
(1)
Font B: 32
Font A WxH(mm) – cpl
1.5 x 3 – 24
3 x 3 – 12
1.5 x 6 – 24
3 x 6 – 12
95
128 per page
'cpl': characters per line.
(2)
(2)
(2) Font B WxH(mm) – cpl
1 x 2 – 32
2 x 2 – 16
1 x 4 – 32
2 x 4 – 16
6 of 57