Ptd55 Connectors - Fenix PTD55 SERIES Operation Manual

Below it is shown a slot example to be performed on the front side of the kiosk to put the paper
•
nozzle across.

4.2 - PTD55 CONNECTORS

On the PTD55 could be found the following connectors (see APPENDIX HOW TO ORDER):
POWER
SUPPLY
4.2.1 - Power supply connector
The PTD55 is powered by an external power supply by means of 3-pins connector shown below.
Verify power supply voltage before connecting the printer.
Use a 3-pin DC jack TCS-7960-43-2010 (HOSIDEN) or equivalent. (See APPENDIX – HOW TO
ORDER-ACCESSORIES).
Fig.4.2. Slot example for paper nozzle (in mm).
USB
Fig.4.3. USB or SERIAL RS232 interface connectors.
GND
N.C
Fig.4.4. Power supply connector J1.
PTD55 SERIES OPERATION MANUAL
POWER
RS232
SUPPLY
24VDC
10 of 57