Whirlpool RF396PCYN3 Use And Care Manual page 24

4. Use the Hour and Minute pads to set the
desired start time. Push the "up" (A) or
"down" (V) pad(s) until the correct time
shows in the display.
This example shows a desired start time
of 2 o'clock.
5. Push the Stop Time pad. The time of day
with the colon flashing will show in the
display and STOP TIME will light up.
6. Use the Hour and Minute pads to set the
desired stop time. Push the "up" (A) or
"down" (V) pad(s) until the correct time
shows in the display.
This example shows a desired stop
time of 2:30. This provides a cook time of
30 minutes (the difference between the
start and stop times).
NOTE: If you do not set a stop time, the
colon will flash in the display and STOP
and COOK will flash alternately to remind
you to program a stop time or a cook time.
(See page 21 for instructions on how to
set delay start and stop automatically
using Cook Time and Delay Start Time.)
7. Push the Start/Enter pad. DELAY and
BAKE will light up in the display to indi-
cate that the oven is programmed to start
at a later time.
NOTE: The display will show "door" and a
tone will sound once a minute for 5 min-
utes if the door is latched when you try to
bake/roast.
You can change the temperature or
time settings any time after pushing the
Stat-t/Enter pad by repeating just Steps 2
through 6.
24