Baking/Roasting - Whirlpool RF396PCYN3 Use And Care Manual

Baking/roasting
1. Position the rack(s) properly before turning
on the oven. To change rack position, lift
rack at front and pull out. For further informa-
tion, see "Positioning racks and pans" on
page 9.
2. Push the Bake pad. "350"" will show in the
small display to indicate the preset tempera-
ture and BAKE will light up.
3.
4.
To cook at a different temperature, use the
Temp pad(s). Push A to raise the tempera-
ture or V to lower the temperature in 5°F
increments. Use these pads until the desired
temperature shows in the small display.
Push the Start/Enter pad. "Lo"", HEAT and
BAKE show in the display to indicate that the
oven is preheating. The temperature will
increase in 5" increments.
NOTE: The display will show "door" and a
tone will sound once a minute for 5 minutes if
the door is latched when you try to bake/
roast.
You can change the temperature setting
any time after touching the Star-t/Enter pad
without touching the Star-t/Enter pad again.
5. When baking, preheat the oven. (Preheating
is not needed when roasting.) The oven is
preheated when you hear a one-second tone
and HEAT goes off.
6. Put food in the oven. During baking/roasting,
the elements will turn on and off to keep the
oven temperature at the setting.
NOTE: The top element helps heat during
baking/roasting, but does not turn red.
14