Whirlpool RF396PCYN3 Use And Care Manual page 19

2. Push the Bake pad to enter the Bake
mode. Use the Temp pad(s) to set the
desired temperature. Push A to raise the
temperature or V to lower the tempera-
ture in 5°F increments. Use these pads
until the desired temperature shows in the
small display.
After,you have set the desired tempera-
ture, the display will show the set tem-
perature and the time of day. BAKE will
light up.
3. Push the Cook Time pad. "0:OO" with the
colon flashing and COOK TIME will show
in the display.
4. Use the Hour and Minute pads to set the
desired cooking time. Push the "up" (A)
or "down" (V) pad(s) until the correct time
shows in the display.
This example shows a desired baking/
roasting time of 30 minutes.
5. Push the Start/Enter pad. "Lo"", HEAT,
BAKE, TIMED and the set cook time will
show in the display to indicate that the
oven is heating.
NOTE: The display will show "door" and a
tone will sound once a minute for 5 min-
utes if the door is latched when you try to
bake/roast.
You can change the temperature or
time settings any time after pushing the
StarVEnter pad by repeating just Steps 2
through 4.
6. The display will count down the baking/
roasting time in minutes.
19