Establish A Connection Between Your Device And The Client - Zte z Quick Manual

Mixed Mode: Connect to the device with the above two connection methods.
The following picture is the application example. All of the client devices can surf on the Internet at the
same time.

Establish a connection between your device and the client

Via USB Cable
1.Connect your device and the client with the USB cable.
2.Install software.
After the installation, the connection between your device and the client will be established successfully a
moment later.
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes to initialize, and then Wi-Fi status icon will
appear on the screen of your device.
2. If the Wi-Fi status shown is
3. Use your normal Wi-Fi application on the client to search the available wireless network.
Notes: You need to check your Wireless Network Connection. Set the client to obtain an
IP address automatically in the Internet protocol (TCP/IP) properties, and the client will get
an IP address like"192.168.0.101".
4. Select the SSID of your device, and then click Connect.
6 Confidential and Proprietary Information of ZTE CORPORATION
, hold the WPS key for about 2 seconds to enable the Wi-Fi function.