Operation And Function; Preparation; Establish A Connection Between Your Device And The Client; Via Usb Cable - Zte MF91 User Manual

3.Operation and Function

3.1 Preparation

Before using the data service, make sure:
SIM card is inserted.
•
All OLED indicators are working normally.
•

3.2 Establish a connection between your device and the client

3.2.1 Via USB Cable

1. Connect your device and the client with the USB cable.
2. Power on your device.
3. Install software.
After the installation, the connection between your device and the client will be established successfully a
moment later.

3.2.2 Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize, and then Wi-Fi OLED icon will be
indicated on the LED screen of your device.
2. Use your normal Wi-Fi application on the client to search the available wireless network.
Notes:
You need to check your Wireless Network Connection. Set the client to obtain an IP address
automatically in the Internet protocol (TCP/IP) properties, and the client will get an IP address
like"192.168.0.101".
3. Select the SSID of your device, and then click Connect. The following figure is only for your
reference.
Confidential and Proprietary Information of ZTE CORPORATION 17