Wan Connection; Disconnect From The Internet - Zte z Quick Manual

The Quick Settings wizard guides you how to set the basic parameters for your device in the safest way.
After this procedure, you can use your Internet service.
Notes:
The parameter settings may have been preset by your service provider, and you will enjoy your Internet
service directly. Please contact your service provider for details if you want to do some modification.

WAN Connection

After logging in, select WAN Connection, and you can choose the WAN Connection Mode
according to your requirement.
Settings
After logging in, select Settings, and you can do the following operations.
Select Settings > 3G Settings
Select Settings > Wi-Fi Settings
Select Settings > Firewall
Select Settings > Advanced
Notes:
Make sure that you can remember the new password if you change the login password by
selecting Settings > Advanced > Management. Please restore the device to the factory default
settings in case you forget the new password.

Disconnect from the Internet

1.Log in the WebGUI Configuration page, and select WAN Connection.
2.Select Manual > Disconnect Internet.
3.Click Apply.
View the 3G Wireless Information, select Band
Selection Mode or change APN Setting.
View the current station list, change the basic
wireless network settings, choose security
mode and WPA type, and perform the WPS
configuration.
Set the Mac/IP/Port Filtering, Port Forwarding
or the System Security configuration.
View the current status of your device, change
the Administrator Settings, restore factory
defaults, manage PIN or set the LAN interface
configuration.
Confidential and Proprietary Information of ZTE CORPORATION 9