Status - Rand McNally TND 740 User Manual

TND User Manual
™

Status

Note: Odometers count up and record the current mileage. Maintenance
counters count down. When a maintenance timer counts down to 2,000 miles,
a reminder displays each time the TND starts.
1. Tap Truck Tools.
2. Tap Status, Trails, Mileage, and Fuel.
3. Tap the Status tab.
Tap a field to make adjustments to mileage. The mileage continue to count
down from the changed value.
--
1. Tap to decrease the setting.
+
2. Tap to increase the setting.
3. Tap the calculator to display a keyboard. Enter a number and tap Enter.
4. Tap Change.
On the right, use the Reset To field to set the most common reset
value, normally zero. At the beginning of each day or run,
tap Reset to set the value back to zero for odometers and 15,000
or 35,000 for maintenance odometers.
--
1. Tap to decrease the setting.
+
2. Tap to increase the setting.
3. Tap the calculator to display a keyboard. Enter a number and tap Enter.
4. Tap Reset.
5. Tools & Features
44