Manual Mode Testing; Preparation For Testing; Tests; Lcd Display Test - Motorola MTP700 Basic Service Manual

PROGRAMMING THE RADIO

Manual Mode Testing

Preparation for Testing

1. Verify that the radio is turned off.
2. Press the "1", "2" and "3" keys together and turn the On/Off knob clockwise to turn the
3. The display shows "LCD Test Press Any Key To Proceed".

Tests

Note: Any key that will be pressed will cause the test to advance from one step to the

LCD Display Test

1. Press any key consecutively. The display shows horizontal lines that becomes
2. Press any key again, the following appears at the top of the display:
3. Press any key consecutively. The display shows vertical lines that becomes thicker
4. Press any key again. The display shows the Motorola logo.
5. Press any key again. The display shows "Vibrator On".
6. Press any key again. The display shows "Red Led On" and the Red LED at the top of
7. Press any key again. The display shows "Green Led On" and the Green LED at the
8. Press any key again. The display shows "Both Leds On" and the amber LED at the
9. Press any key again. The display shows "Backlight On" and the display and keypad
MTP700/MTP750 Portable Radios / Basic Service Manual
radio on.
next.
thicker with every key press, until it becomes fully dark.
with every key press, until it becomes fully dark.
You will need to have an external Smart RSM (RMN5011_ or RMN5012_) to verify
that the radio is vibrating.
the radio is constantly lit.
top of the radio is constantly lit.
top of the radio is flashing.
backlight are both on.
4 - 5