Table of Contents
Advertisement
Manual Mode Testing
Preparation for Testing
TESTS
LCD Display Test
22
1. Verify that the radio is turned off.
2. Press the "4", "5" and "6" keys together and then, press the On/Off key to turn
the radio on.
3. The display shows "LCD Test Press Any Key To Proceed".
Note: Any key that will be pressed will cause the test to advance from one step to
the next.
1. Press any key consecutively. The display shows horizontal lines that becomes
thicker with every key press, until it becomes fully dark.
2. Press any key again, the following appears at the top of the display:
3. Press any key consecutively. The display shows vertical lines that becomes
thicker with every key press, until it becomes fully dark.
4. Press any key again. The display shows a map of Europe.
5. Press any key again. The display shows "Vibrator On", verify that the radio is
vibrating.
6. Press any key again. The display shows "Red Led on" and the Red LED at the
top of the radio is lit.
7. Press any key again. The display shows "Green Led on" and the Green LED
at the top of the radio is lit.
PROGRAMMING THE RADIO: Manual Mode Testing
Advertisement
Table of Contents
