Furuno VR-3000 Operator's Manual page 6

IF AN INCIDENT OCCURS
Press the SAVE button on the Remote Alarm Panel. Bring the HDD with you after an incident
occurs, if possible.
•
The SAVE LED (yellow) starts flashing and shortly thereafter lights. Then, recording to the
current memory area in the backup HDD in the Data Collecting Unit is stopped and recording
to another memory area starts. The memory in the backup HDD is divided into four areas.
If you press the SAVE button on the RAP, one recording area stops recording. If you press
the SAVE button four times, all four areas stop recording. If you pressed the SAVE button,
consult a FURUNO dealer to restore the HDD after an investigation of the incident is
completed by the authorities.
•
Recording at the Data Recording Unit continues.
iv
SAVE LED
(yellow)
SAVE button