Testing Display Of Remote Alarm Panel - Furuno VR-3000 Operator's Manual

Error Code Error Name
435 DRU Device
Recording Verify
Failure
436 BackupHDD Device
Recording Verify
Failure
437 Fatal System Failure
438 VDR System
Information Error

3.3 Testing Display of Remote Alarm Panel

Press the TEST button on the RAP to check that all LCD segments are displayed properly.
Description
Serial data from DRU are not
recorded correctly because the DRU
format is out of order.
Serial data from BackupHDD are not
recorded correctly because the
BackupHDD format is out of order.
Fatal system error. This indicates
that VR-3000/S can not be rebooted
automatically.
VDR system information can not be
acquired. Usually, this error is
recovered automatically.
Action
Restart VDR. If error occurs again, request
service to reformat DRU.
Restart VDR. If error occurs again,
Request service to reformat BackupHDD.
Restart VDR manually. If VR-3000/S does
not recover, request service.
If error is not recovered automatically,
restart VDR. If VR-3000/S does not
recover, request service.
21