Sanitisation Guide - Borg & Overstrom b5 Quick Start Manual

Sanitisation Guide

NOTE: Before beginning the sanitation process please ensure that water is turned off at
the mains and refer to the MSDS document for further information. Use bioguard hand
gel and ensure gloves are worn.
1
Briefly press cold/ambient
dispense button to release
internal water pressure from
the machine. Remove the
existing filter.
3
Turn on incoming water,
allow service cartridge to fill.
Dispense water using the cold
button until the water appears
pink. Briefly press the ambient
button too. Repeat with
sparkling button if present.
Borg & Overström
hot
cold
heating
chilling
PINK
Quick Start Guide
2
Add 25 ml of Bioguard
Internal Sanitisation fluid to a
clean and empty service filter
cartridge and connect to the
machine.
4
Leave the solution inside
machine for sanitisation
to take effect (minimum 5
minutes) while thoroughly
cleaning the machine
externally, pay particular
attention to the dispense
faucet and button controls.
9 GB