Leak Dectection - Borg & Overstrom b5 Quick Start Manual

Leak Detection
NOTE: This machine is equipped with a leakage detection device. When leaking is
detected, the dispense operation will be cut off automatically. This is indicated by a blue
LED flashing at the base of the tap.
To reset:
1
Unplug the machine and remove
the protective cover.
3
Locate the Leak Detector valve.
Reset the lever (push it in).
Borg & Overström Quick Start Guide
2
Locate the leak and rectify.
Locate the detection probe which
can be found in the bottom at
H O T
the rear of the machine. Dry the
probes and internal area with a
dry cloth.
4
Reconnect the power to machine
and test operation.
11 GB