Co2 Bottle Installation - Borg & Overstrom b5 Quick Start Manual

CO2 Bottle Installation (Sparkling Versions Only)
1
OFF
Attach the regulator to the
disposable CO2 bottle, ensuring
the regulator is closed. Connect
the CO2 bottle and regulator
to the machine using 1/4 inch
pipe.
3
We recommend between 3.5
- 5 bar. Do not exceed 5 bar
pressure.
Borg & Overström
IMPORTANT! ALWAYS ENSURE SECURITY CLIPS ARE
USED ON ALL WATER AND CO2 CONNECTIONS.
5 Max bar
Quick Start Guide
2
After completing the water
installation, turn on the soda
power switch and the pump will
run. Do not open the regulator
valve until the carbonated switch
has been turned on.
4
1
hour
10
L
Flush through approximately 10
litres of water. Check and adjust
the CO2 pressure accordingly.
The machine needs leaving for
1 hour for sparkling water to
develop.
3 GB