Routing Table - Tenda F3 User Manual

Login to your Tenda Router's User Interface, click Advanced (on the homepage) >
❶
Applications > Static Routing to enter the setting page.
❷
Add a static route here.
Destination Network IP address: Enter the destination network range, "134.111.0.0".
Subnet Mask: Enter the subnet mask of the destination network range, "255.255.0.0".
Gateway: Input the LAN IP address of the next hop to which messages are forwarded from
Tenda Router, here "192.168.0.10". Note that this Tenda Router and your located router should
be in the same network segment.
❸
Click Add to add the route to the list. Click OK to activate the settings.
Verification
Try visiting the Internet and MAN service from the computer or other connected wireless devices, if
you can visit them successfully, the static routing you set takes effect.

Routing Table

Statistics through the Router are transmitted according to the routing table.
69