Tenda F3 User Manual page 55

❶
Press the WPS button on the router for 1~3 seconds and then release it.
❷
Within 2 minutes, enable WPS feature on your wireless clients.
Take SAMSUNG cellphone as an example:
Enter the WLAN setting page, and tap the icon
Then select WPS push button on the pop-up subpage. The cellphone's WPS feature is enabled.
Use a PIN code
There are two ways to use PIN code. You can choose one to follow according to the WPS feature
type of your wireless device.
Method 1:
Type the AP PIN Code to your wireless device's PIN required box, 31931076 here, and the click
OK in the bottom of this page..
51
on the bottom left corner on the cellphone.