Tenda F6 Quick Installation Manual

Quick Installation Guide

For product or function details, please go to www.tendacn.com.
Wireless N300 Home Router
Model: F6

Package contents

Wireless router * 1
Power adapter * 1
Ethernet cable * 1
Quick installation guide * 1
If any item is incorrect, missing, or damaged, please keep the original package and
contact the local reseller or distributor immediately.
2
Setting up the router
1. Start a web browser on a computer connected to the router,
enter 192.168.0.1 or tendawifi.com into the address bar,
and press Enter.
192.168.0.1
Tips
If you cannot log in to the web UI of the router, refer to Q1 in FAQ.
1
Connecting the router
1 1 Power off your modem, and remove its battery (if any).
2 2 Connect the WAN port of the router to a LAN port of your modem or to an Ethernet jack.
3 3 Power on your modem, and reinstall its battery.
4 4 Use the included power adapter to connect the router to a power source. The LED indicator lights solid on.
5 5 Connect your devices to the router.
Wireless devices: Connect wireless devices to the WiFi network of the router using the default WiFi name
specified on the product label. By default, there is no WiFi password.
Wired devices: Connect wired devices to LAN1, LAN2 or LAN3 port of the router.
Or
2. The router detects your internet connection type automatically,
which is PPPoE in this example. Enter the user name and password
provided by your internet service provider (ISP), set up a WiFi name
and WiFi password, and click OK.
You can access the internet after completing settings on this page.
As detected, your connection type is: PPPoE
Connection Type Dynamic IP Address
PPPoE
This type is applicable if you have a user name and
password for setting up a broadband dial-up
Internet
connection. You can import them from your original
router.
User Name User Name from ISP
Password Password from ISP
WiFi Name
Wireless WiFi Password 8 or more characters
OK
WAN
5
WiFi/RST LAN3 LAN2 LAN1 WAN PWR
Ethernet cable
3. Done.
Connect your wireless devices to the WiFi network of the router
again using the WiFi name and password you set.
Your wired devices connected to the router can access the internet
directly now.
You can access the internet after completing settings on this page.
Static IP Address
1
3
Modem
4
Or
Ethernet jack
2
Saved!
You will be redirected to user interface after 3 seconds.
OK